特征

        Compliant with DisplayPort Alternate Mode on USB Type C standard
  Compliant with DisplayPort Specification version 1.3 and Embedded DisplayPort (eDP) Specification version 1.4
  Support up to 4 Main Link Lanes at 1.62Gbps,2.7Gbps (HBR) or 5.4Gbps (HBR2) link rate
  Automotive DP input signal detection and Lane swap supported for compliance with the USB type C cable plug orientation switch
  DP_BR signaling modes supported
  Programmable DisplayPort receiver equalization supported for the compensation of input signal attenuation
  Support Spread Spectrum Clocking (de-spreading) for EMI reduction
  Support Fast and full Link Training
  Support eDP Authentication: Alternative Scramble Seed Reset and Alternative Framing
  HDMI transmitter compliant with HDMI specification version 2.0 and DVI specification version 1.0
  HDMI transmitter supports up to 6.0Gbps data rate for video timing of 4Kx2K@60Hz
  HDMI 3D dual view and 3D audio are supported
  High-Dynamic-Range (HDR) display are supported
  YCC 4:4:4/4:2:2 to YCC 4:2:2/4:2:0,Y-only(Gray display) conversion are supported
  HDCP engine compliant with HDCP 2.2 specification with internal HDCP Keys
  HDCP 2.2 repeater supported
  Active DDC buffer and related control register integrated
  SCDC supported on HDMI DDC
  IIC-over-AUX transaction supported
  CEC tunneling over AUX is supported
  AUX CH polarity inversion supported for USB type C cable plug orientation switch
  Programmable Pre-Emphasis on output driver supported
  Support 2 USB Type-C ports that are compliant with USB Type-C Cable and Connector Specification revision 1.3.
  Compliant with USB Power Delivery Specification Revision 3.0, Version 1.1, with USB Power Delivery BMC transceiver integrated on each USB Type-C port
  Integrated Ra, Rd and Rp for USB Type-C
  On-chip Audio Decoder which support 8 channel Audio input from DP Rx and output from HDMI Tx with sample rate up to 192KHz
  SPDIF/IIS input supported with audio sampling rate up to 192KHz
  Embedded MCU to handle the control logic
  Full speed USB billboard module integrated
  USB 2.0 PHY supported with internal switch for data/file transport