特征

1. Compliant with DisplayPort Alternate Mode on USB Type C standard
2. Compliant with DisplayPort Specification version 1.3 and Embedded DisplayPort (eDP) Specification version  1.4
3. Support 2 Main Link Lanes at 1.62Gbps,2.7Gbps (HBR) or 5.4Gbps (HBR2) link rate
4. Automotive DP input signal detection and Lane swap supported for compliance with the USB type C cable plug orientation switch
5. DP_BR signaling modes supported
6. DisplayPort receiver auto equalization supported for the compensation of input signal attenuation
7. Support Spread Spectrum Clocking (de-spreading) for EMI reduction
8. Fast and full Link Training for embedded DisplayPort system
9. Support eDP Authentication: Alternative Scramble Seed Reset and Alternative Framing
10. USB Power Delivery control module supported with HPD to PD converter integrated
11. HDMI transmitter compliant with HDMI specification version 2.0 and DVI specification version 1.0
12. HDMI transmitter supports up to 3.0Gbps data rate for video timing of 4Kx2K@30Hz, or 4K2K@60Hz on YCC 4:2:0 mode
13. HDMI 3D dual view and 3D audio are supported
14. High-Dynamic-Range (HDR) display are supported
15. YCC 4:4:4/4:2:2 to YCC 4:2:2/4:2:0,Y-only(Gray display) conversion are supported
16. HDCP engine compliant with HDCP 2.2 specification with internal HDCP Keys
17. HDCP 2.2 repeater supported
18. Active DDC buffer and related control register integrated
19. IIC-over-AUX transaction supported
20. Programmable equalizer
21. Programmable Pre-Emphasis on output driver supported
22. On-chip Audio Decoder which support 8 channel Audio input from DP Rx and output from HDMI Tx with sample rate up to 192KHz
23. Support 2 USB Type-C ports that are compliant with USB Type-C Cable and Connector Specification revision 1.3.
24. Compliant with USB Power Delivery Specification Revision 3.0, Version 1.1, with USB Power Delivery BMC transceiver integrated on each USB Type-C port
25. Integrated Ra, Rd and Rp for USB Type-C
26. Embedded MCU to handle the control logic
27. USB billboard module integrated
28. USB 2.0 PHY supported
29. Embedded EEPROM, integrated EDID Buffer
30. IIC Slave and USB 2.0 port are available for firmware update.
31. Support Auto Power Saving mode and low stand-by current
32. Anti-back drive support
33. Low power architecture
34. RoHS compliant and Halogen free package
35. HBM 2KV ESD performance
36. Offered in 48 pin QFN package (7 X 7 mm)